Sunday 27 November 2016

Washing Machine Repair Services in Albuquerque, NM

At Mr. Ed’s, we have experience performing all types of washing machine repair in Albuquerque on all major brands. Here are some of the most common washing machine problems we encounter.

A washing machine that fails to drain water may have a clogged hose or water pump. It’s also possible that the door switch is defective. This switch stops the washer from continuing its cycles when the door opens. If the switch goes bad, your washer may fill and wash clothes but the drain, spin, or rinse cycles can be affected. Sometimes a worn drive belt will slip and keep the pump motor from working, in which case the washer may not drain.


Mr. Eds Appliance is the premier appliance repair service in the area. Trusted and respected Mr. Eds Appliance Repair Albuquerque does only quality work. They also have a sales department of pre-existing appliances. There are a few issues that may keep a washing machine from filling or cause a very slow fill. Sometimes the problem is clogged filters or a kinked water hose that keeps water from passing through. The water level switch may be faulty or the water inlet valve may need to be adjusted.

Home appliances are items in the home that many people simply expect to be there and expect to work. The reality is that these gadgets do not last forever and sometimes they break or need repair. Many people want to make sure that they have these gadgets working at all times and this means that while a great deal of the time may be a simple solution you will need to get the washing machine working again, you simply buy a new one because it requires less reflection. A better option would be to look for the engineers to carry out the repairs of the washer at affordable prices.


The reality is that washing machines are worked on a daily basis. People would put on their dirty, oily, oily clothes, hoping everyone would come out as clean as ever. The good thing is that most of the time they will actually come out clean. The problem is, however, there are a lot of parts that can break or wear out when put under extended tension, which is where the washer repairs come in.

If you are also having problems with your washer and dryer, then you could use our washer & dryer repair service in Albuquerque and visit our page that talks about all the services we repair.

Monday 7 November 2016

Professional Appliance Repair Services in Albuquerque, NM

Appliance repair is a service you can get if you want to repair an appliance or if you want to maintain the proper state of all appliances in your home. The types of appliances that can be repaired can range from small appliances such as blender and coffee maker to the largest appliance you have, such as refrigerator and circulating air. Experience can also play a large role in the number of appliances that can repair, and the quality of your work.

If you are going to hire an appliance repair Albuquerque specialist, the first thing you will get out of them is that you will be able to save a lot of money. With the help of an appliance repair specialist, you can be sure that your appliances will be in perfect condition and will serve your purpose perfectly. You can expect that you will always get the best service along with the best value for your money.


There are a few reasons a refrigerator may leak. The lines to the dispenser may require replacement or the drain pan may be cracked. If you see a large puddle of water in the refrigerator, you may have a clogged drain tube. If your fridge is equipped with a water dispenser that isn’t functioning at all, the problem is likely the dispenser control board, which must be replaced. Other issues that can cause problems with the water dispenser include a frozen water supply tube, low water pressure, or a defective dispenser switch.

Has your ice maker stopped working? Make sure the wire next to the ice maker is in the downward position. If the ice maker is on but not working, the problem may be that the freezer is not cold enough or the freezer door seal is broken. The heater that comes on for a minute or two to break the ice cubes out of the mold may also be failing and staying on too long. If the ice maker mold is hot to the touch, it means the ice maker is probably jammed. It’s usually best to just replace the ice maker.


At Mr. Eds Appliance repair service, we repair all major refrigerator brands, including Kenmore, Frigidaire, Maytag, GE, Kitchenaide, Amana, LG, and Bosche. We have proudly served the Rio Rancho and Albuquerque area for more than 35 years with competitive rates, same-day service, free repair estimates, and senior discounts. If your refrigerator is leaking, cycling too often, or failing to keep food cold, contact us today to get a free estimate and get your fridge back in perfect working order.

Mr. Eds Appliance offers the best refrigerator repair in albuquerque, New Mexico & Get more infomation or Please visit our http://mredsappliance.com/